Engineered for maximum chemical resistance, high vacuum stability, and zero fugitive emissions in severe corrosive fluid services.
Full bore ball valves, plug valves, butterfly valves, diaphragm valves, check valves, and flush bottom valves engineered for severe chemical services.
Explore 9 Valves
Straight pipe spools, 90°/45° elbows, equal & reducing tees, instrument tees, concentric reducers, and expansion bellows.
Explore 16 Fittings
Dip pipes, gas spargers, Y-strainers, braided flexible hoses, GLR reactor interfaces, and custom PTFE components.
Explore 6 Accessories
Two-piece or three-piece full bore lined ball valve engineered for tight shutoff in corrosive fluids, acids, and solvent handling.
Quarter-turn bi-directional lined plug valve providing positive shut-off with minimal maintenance in slurry and aggressive chemical pipelines.
Glandless weir type lined diaphragm valve offering absolute isolation of actuator mechanism from hazardous corrosive process fluids.
Resilient seated centric lined butterfly valve providing bi-directional bubble-tight shutoff in large diameter corrosive gas and liquid lines.
Fully encapsulated swing type non-return check valve designed to prevent reverse flow of aggressive chemicals with minimal cracking pressure.
Gravity-assisted solid PTFE ball check valve ideal for vertical piping installations carrying hazardous corrosive chemicals and crystallizing fluids.
Safety process sampling valve allowing operators to extract representative liquid samples from chemical reactors and pressurized pipelines safely.
Tank drainage valve designed for mounting directly to the bottom nozzle of glass-lined and lined chemical reactors for unobstructed drainage.
Linear travel fluoropolymer-lined globe valve designed for throttling and regulating corrosive liquids with high precision.
Seamless carbon steel pipe spools lined with heavy-wall paste-extruded PTFE liners, flared over flange faces for 100% corrosion protection.
Cast or fabricated 90-degree directional lined elbow engineered for smooth fluid turning with minimum pressure loss and zero permeation.
45-degree directional lined elbow offering gentle angle transitions to reduce pipe vibration and flow resistance in aggressive chemical services.
Three-way branch fitting with identical nominal bore across run and branch, lined with seamless fluoropolymer for split chemical routing.
Reducing tee allowing direct branch line take-off of a smaller diameter without requiring external reducing fittings.
Short face-to-face lined tee designed specifically for modular skids and tight piping arrangements where standard tees exceed dimensional limits.
45-degree lateral branch fitting engineered to blend or diverge corrosive process streams with low turbulence and minimal backpressure.
Specialized piping branch fitting designed for direct installation of thermowells, pressure transmitters, and pH probes in lined pipelines.
Conical lined fitting used to change pipe size along the same centerline axis with gradual, uniform acceleration or deceleration of corrosive fluid.
Flat-on-top or flat-on-bottom lined reducer designed to prevent gas pockets at pump suctions and facilitate complete line drainage.
One-piece blind/slip flange with an off-center or centered reduced lined bore, used to adapt line sizes where face-to-face space is zero.
Multi-convolution virgin PTFE flexible expansion joint designed to absorb thermal growth, pipe misalignment, and pump vibration.
Visual inspection spool featuring borosilicate glass windows and full PTFE lining to observe fluid flow, color, and phase conditions safely.
Heavy carbon steel blind flange clad with a thick bonded or flared virgin PTFE disc to dead-end corrosive piping systems reliably.
Solid or steel-cored PTFE spacer rings used to adjust piping spool lengths, provide electrical insulation, and seal critical joints.
Large-diameter lined column sections with internal PTFE packing support grids, distributors, and feed rings for acid distillation.
Heavy-duty lined dip pipe designed for introducing liquid reactants or gas sparging directly below the liquid level in chemical reactors.
In-line lined Y-strainer and basket strainer equipped with perforated PTFE filter elements to safeguard pumps and valves from pipeline debris.
Stainless steel wire-braided smooth-bore or convoluted PTFE hose assemblies designed for chemical road tanker loading and movable skids.
Specialized accessories engineered specifically to interface with glass-lined reactors, including nozzle protection rings, manhole sleeves, and baffles.
Solid virgin PTFE gaskets, expanded PTFE tape, and envelope gaskets with CNAF / corrugated steel cores for ultimate chemical flange sealing.
Bespoke fluoropolymer lined components, manifolds, tanks, and machined parts manufactured strictly to client engineering specifications.